Table of Contents
Advertisement
Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Holding calls
Step
by
Step
Putting external subscribers on hold
You are conducting an external call.
1.
Press [INT]: The external subscriber is put on hold.
The waiting external subscriber hears music-on-hold. You can conduct an inter-
nal enquiry call.
2.
As soon as the internal subscriber ends the enquiry call, [BACK] appears on the
display for 10 seconds. Pressing [BACK] reconnects you to the external caller.
If this option is not used, the ring tone sounds again after 10 seconds.
or
To end the internal call, press
2.
[OK]. You are then returned to the external call and the internal subscriber hears
the busy tone.
Putting internal subscribers on hold
You are conducting an internal call.
Press [CONSULT]: The internal subscriber is put on hold.
1.
You can set up an external enquiry call.
To end the external call, press
2.
[OK]. You are then returned to the internal call and the external connection is
closed.
or
To set up a three-party conference, press [CONF .]. This establishes the confer-
2.
ence circuit.
Parking/continuing calls ("unpark")
You are conducting an external call which you would like to transfer to another
telephone at your ISDN connection, for example.
1.
Press
Select using [ ] and [OK]:
2.
Enter a parking number (one or two digits) and confirm with [OK].
3.
Press
4.
Unparking a call before answering
Press
1.
2.
Select using [ ] and [OK]:
Enter the parking number assigned previously and confirm with [OK].
3.
Press
4.
Call status is restored.
"Cancel CallPark" after answering a call
Press
1.
Press
2.
Select using [ ] and [OK]:
3.
4.
Enter the parking number assigned previously and confirm with [OK].
for the menu.
Call Park
.
for selection menus.
Service Set up
.
.
for the menu.
Cancel CallPark
giga3070KAP .fm
Making comfort calls
for the menu and select [End] followed by
for the menu and select [End] followed by
.
Call preparat.
.
09.01.01
Cancel CallPark
.
35
Hide quick links:
Advertisement
Table of Contents
