Gigaset USB Adapter 54 / English / A31008-E505-B104-1-19 / installation.fm / 26.02.2004
Installing the Gigaset USB Adapter 54
After installation, a message will appear prompting you to complete installation.
Click on Finish. This closes the installation program.
Restart your PC if you are prompted to do so.
If installation was successful, you can now use the Gigaset WLAN Adapter Monitor. With
the Gigaset WLAN Adapter Monitor you can configure your Gigaset USB Adapter 54 and
create a connection to other network adapters or an Access Point.
The Gigaset WLAN Adapter Monitor is represented by an icon in the status area of the
taskbar that also shows if there is already a connection to a connection partner.
The monitor icon in the taskbar
After installation, check in the status area of the taskbar to see if installation was
successful and whether your Gigaset USB Adapter has already set up a connection.
Whether an active connection has been set up to the local network depends on the
network configuration (e. g. encryption).
In a wireless network using only Siemens Gigaset products, the connection to an Access
Point is set up automatically during installation.