Installer Remote Control Typical Key Functions - LG 22LG3DDH Owner's Manual

Installer Remote Control Typical Key Functions

An LG Installer Remote similar to that shown below is required to set up and operate the TV. The LG Installer
Remote illustrated below and throughout this document shows typical remote control functions and is provided
for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.
Switches sound On or Off.
Analog Mode: Selects MTS sound (Mono,
Stereo, or SAP). DTV Mode: Changes the audio
language, if additional languages are available. *
Displays channel information. INFO feature is not
functional for Aux sources.
Press to activate subtitles, unless the Channel
Banks Setup Menu is currently on the screen, in
which case this option displays the Lock (V-Chip)
NUMBER Buttons (0 - 9) & DASH
Use to enter a program number or channel. Dash
is used for sub-channel numbers such as 9-1,
FLASHBK (Flashback)
Returns to the previously tuned channel.
Up/Down/Left/Right Arrows
Use to navigate on-screen menus and adjust TV
settings to your requirements.
*
SAP notes:
•
SAP settings are retained with power Off/On for
individual analog channels.
•
If SAP is selected and no SAP is provided, sound
may not be heard on channel.
•
Each analog channel may have its own SAP setting.
•
Digital channels will reset to default audio language
with a power Off/On.
8
MUTE
MUTE
CH
PREVIEW
BANK
SAP
SAP INFO
INFO
CH
OK
VOL
CC
CH
Menu.
9-2, etc.
TIMER MENU
ADJ
ADJ ADJ
BED1
POWER
POWER
Turns the TV On or Off.
GUIDE
BANK
Selects Channel Bank 1, 2, 3, or 4.
CC
CH PREVIEW
Displays and exits the Channel Banks Setup Menu.
GUIDE
Displays and removes the electronic program
guide.
CHANNEL UP/DOWN
VOL
Selects available channels found with Auto Tuning.
VOLUME UP/DOWN
Increases/decreases sound level.
OK (Enter)
Use to direct tune channels and also to adjust TV
settings.
TIMER
Sets the amount of time before the TV
FLASHBK
automatically turns itself Off.
MENU
ALARM
Displays the TV setup menus on the screen.
Also exits the on-screen menu system and
returns to TV viewing.
ALARM
ADJ
Enables users to schedule a one-time "alarm"
event, in which the TV turns itself On at the
user-specified time.
BED2
Bed Switch
Set to Bed 1 or Bed 2 as applicable (per
Installer Menu item 027 HOSPITAL MODE
setting).
206-4190