Installer Overview - LG 42LD340H Setup Manual

Lodging guest interactive pro:centric tvs commercial mode setup guide
Hide thumbs Also See for 42LD340H:
Table of Contents

Advertisement

Installer Overview

This is the Commercial Mode Setup Guide only.
Installer Menu / Commercial Mode Setup
To set up a Master TV for cloning purposes, you will need to know how
to enter the TV Installer Menu and make changes to the default values
as required. Similarly, to configure a TV's Installer Menu settings in FTG
Mode, you will need to know how to access and use the FTG
Configuration Application utilities. If necessary, familiarize yourself with
the Installer Menu and how to make and save changes. Refer to page 14
for information on accessing the Installer Menu in Pass-through Mode.
Pages 15 to 20 describe Installer Menu items in detail. Refer to pages 29
to 39 for information on entering FTG Mode and using the FTG
Configuration Application utilities.
Installer Remote
The LG Installer Remote is supplied with and dedicated to operate the
TV. See next page for typical key functions in TV operating mode. Some
DVD and VCR controls may be available for selected LG DVD/VCR
products.
Cloning
Cloning refers to the process of capturing a Master TV Setup and trans-
ferring it to a Target TV. The Master TV's clonable features need to be
configured as part of the Commercial Mode Setup. This is a critical step.
If the Master TV's clonable features—channel icons or labels, digital font
options, etc.—are not set up correctly, the cloned TVs will all have prob-
lems. Pages 23 to 28 provide detailed information on cloning requirements
and procedures.
Installing Batteries in Installer
Remote
Open the battery compartment cover on the back side of the remote.
Install two high-quality alkaline 1.5V AAA batteries. Never mix old
or used batteries with new ones. Install batteries matching correct
polarity as shown (+ with + and - with -).
Replace the battery compartment cover.
10
xxLD340H PTC INSTALLER MENU
000 INSTALLER SEQ
000
UPN 000-000-000-000
ASIC 20E7
PTC V1.00.001
CPU V3.25.00
Typical Installer Menu
ALARM TIMER
INPUT
TV
1
2
3
4
5
6
7
8
9
0
FLASHBK
INFO
i
VOL
CH
PORTAL
MUTE
GUIDE
MENU
CC
ENTER
RETURN
SAP
EXIT
EJECT
RATIO
P
A
G
E
206-4186

Advertisement

Table of Contents
loading

Table of Contents