Print Speed - SATO CL408 Programming Manual

Programming Manual
Command Structure:
<ESC>CSa
a:
Example:
Placement:
Default:
Function:
To specify a unique print speed through software for a particular label.
This allows flexibility in finding the best performance and quality for the
particular label format, media, and ribbon. All subsequent labels will
print at this speed unless the speed is changed with this command or
through the Operator Panel.
Input:
<ESC>A
<ESC>CS5
<ESC>Z
Output:
There is no printer output for this command. It sets the print speed of
the printer.
Note:
1. This becomes the new setting in the printer configuration for all
subsequent print jobs, unless changed. The setting is stored in
non-volatile memory and is not affected by cycling the power.
2. This command will overwrite the Display Settings.
3. The allowable Print Speed settings are as follows:
Printer
CL 408
CL 412
CL 608 (VA)
CL 612 (VA)
M8490S
M8460S
SATO RISC Printers

Print Speed

Designates the speed selection
See Note for allowable settings
<ESC>CS6
Must be placed immediately after <ESC>A and imme-
diately before <ESC>Z in its own separate data stream
As previously set in the printer configuration
a
1
2
3
4
5
4
6
8
2. Command Codes
Speed
2 ips, 50 mm/s
3 ips, 75 mm/s
4 ips, 100 mm/*s
5 ips, 125 mm/s
6 ips, 150 mm/s
4 ips, 100 mm/s
6 ips, 150 mm/s*
8 ips, 200 mm/s
79