Replace Data (Partial Edit) - SATO CL408 Programming Manual

2. Command Codes
Command Structure:
<ESC>0 (<ESC>zero)
Example:
Placement:
Default:
Function:
To replace a specified area of the previous label with new data. This
command will cause the previous label to print along with any changes
specified within the current data stream.
Input:
<ESC>A
<ESC>H0025<ESC>V0020<ESC>W0BCL 608
<ESC>H0025<ESC>V0085<ESC>WB1M8485S
<ESC>H0025<ESC>V0150<ESC>WL0M8490S
<ESC>H0025<ESC>V0215 <ESC>WL1M8460S
<ESC>Q1<ESC>Z
<ESC>A
<ESC>0<ESC>H0025<ESC>V0020<ESC>WB0M8459S<ESC>Q1<ESC>Z
Output:
Note:
1. Specify the exact same parameters for the image to be replaced
as were specified in the original data stream, including rotation,
expansion, pitch, etc. This will ensure that the new data will
exactly replace the old image. If the replacement data contains
82

Replace Data (Partial Edit)

See above
Must follow <ESC>A and precede all other print data
None
Programming Manual
SATO RISC Printers