Form Overlay, Store - SATO CL408 Programming Manual

Programming Manual
Command Structure:
<ESC>&
Example:
Placement:
Default:
Function:
To store a label image in the volatile form overlay memory. Only one
label image may be stored in this memory area at a time.
Input:
<ESC>A
<ESC>H0001<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0001<ESC>V0165<ESC>B103100*12345*
<ESC>&
<ESC>Z
Output:
There is no output from this command. It stores the label image in the
overlay buffer.
Note:
1. Remember that this storage is volatile. Therefore, if the printer
loses power, the overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall
command.
3. Form overlays do not have to be recompiled each time they are
called to be printed and therefore may result in much faster print
output.
SATO RISC Printers

Form Overlay, Store

See above
Must be preceded by all other data and placed just be-
fore the Stop command (<ESC>Z)
None
2. Command Codes
53