SATO CL408 Programming Manual page 35

Programming Manual
Note:
1. This command will expand the following fonts: Fonts U, S, M, XU,
XS, XM, OA & OB and fonts WB, WL, XB and XL.
2. This command will also affect the following commands:
Character Pitch
Characters, Custom-Designed
3. The Character Expansion value is in effect for the current print
job until a new expansion command is specified.
4. The Line and Box command, if used within the data stream, may
return all subsequentext to the default expansion of 1x1. There-
fore, either send the Character Expansion command before all
printed data, or send Line and Box commands last, preceding the
<ESC>Q Quantity command.
SATO RISC Printers
2. Command Codes
35