Fiber Optic Ports; Figure 27: 10Fl St Connector; Figure 28: 100Fx Mtrj Connector; Figure 29: 100Fx St Connector - RuggedCom RuggedServer RS416 Family Installation Manual

Ethernet Ports

5.2 Fiber Optic Ports

Depending on the order code of the product, the RS416 can be equipped with several
different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections of
each port must be properly connected and matched for proper link and operation.
Modules populated on the top row of the device typically have locking mechanisms or
tabs towards the top of the unit. Modules located on the bottom row of the device have
locking mechanisms or tabs towards the bottom of the device.
The drawings in the following figures show each fiber optical connector style with a side
and top view to allow the user to identify the proper cable connection orientation. If
modules are populated on the bottom row of the device, the transceiver orientation will
be reversed (i.e. RX and TX will be reversed).

Figure 27: 10FL ST connector

Figure 30: 100FX LC
connector
®
RuggedCom
Figure 28: 100FX MTRJ
connector

Figure 31: 100FX SC connector

34
RuggedServer™ RS416 Family Installation Guide rev118
Figure 29: 100FX ST
connector