Federal Communications Commission Radio Frequency Interference Statement - RuggedCom RuggedServer RS416 Family Installation Manual

Federal Communications Commission Radio
Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his expense.
This product contains a laser system and is classified as a "CLASS 1 LASER PRODUCT".
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. This product contains no user-serviceable parts. Attempted
service by unauthorized personnel shall render all warranties null and void.
Should this device require service see the "Warranty" section of this installation guide.
This unit should be installed in a restricted access location where access can only be gained by
service personnel or users who have been instructed about the reasons for the restrictions applied
to the location and about any precautions that shall be taken; and access is through the use of a tool
or lock and key, or other means of security, and is controlled by the authority responsible for the
location.
®
RuggedCom
Caution
Important
3
RuggedServer™ RS416 Family Installation Guide rev118