Ac Power Supply Wiring Examples; Figure 9: Ac Single Power Supply Wiring Example; Figure 10: Ac Dual Redundant Power Supply Wiring Example - RuggedCom RuggedServer RS416 Family Installation Manual

Modular serial device server with integrated managed ethernet switch

Hide thumbs Also See for RuggedServer RS416 Family:

Table of Contents

Installation

2.2.1 AC Power Supply Wiring Examples

Figure 9: AC Single Power Supply Wiring

Example

NOTES:

1. 100-240VAC rated equipment: A 250VAC appropriately rated circuit breaker

must be installed.

2. Equipment must be installed according to the applicable country wiring codes.

3. When equipped with two HI voltage power supplies, independent AC sources

can be used to power the product for greater redundancy. However, separate

circuit breakers must be installed and separately identified (not shown in above

figure).

RuggedCom

Figure 10: AC Dual Redundant Power Supply

Wiring Example

RuggedServer™ RS416 Family Installation Guide rev118

Table of Contents