Dielectric Strength (Hipot) Testing; Figure 14: Dielectric Strength (Hipot) Testing - RuggedCom RuggedServer RS416 Family Installation Manual

Modular serial device server with integrated managed ethernet switch

Hide thumbs Also See for RuggedServer RS416 Family:

Table of Contents

Installation

2.3 Dielectric Strength (HIPOT) Testing

For dielectric strength (HIPOT) testing in the field, users must remove the metal jumper

located on terminal 2, 4, and 6 of the power supply terminal block. This metal jumper

connects transient suppression circuitry to chassis ground and must be removed in order

to avoid damage to transient suppression circuitry during HIPOT testing. Figure 14

shows the proper HIPOT test connections and should be followed to avoid damage to

the device.

RuggedServer™ RS416 Family Installation Guide rev118

RuggedCom

Table of Contents