RuggedCom RuggedWireless RS900W Family Upgrade Manual
Wireless ethernet with integrated 8-port managed switch, 128-bit encryption
Hide thumbs
Also See for RuggedWireless RS900W Family:
- Specification sheet (10 pages) ,
- Installation manual (22 pages) ,
- Installation manual (42 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Advertisement
Table of Contents
Related Manuals for RuggedCom RuggedWireless RS900W Family
Summary of Contents for RuggedCom RuggedWireless RS900W Family
- Page 1 RuggedWireless™ RS900W Family Wireless Firmware Upgrade Guide RuggedCom Inc. 30 Whitmore Road, Woodbridge, Ontario Canada L4L 7Z4 Web: www.ruggedcom.com Tel: (905) 856-5288 Fax: (905) 856-1995 Toll Free: (888) 264-0006...
- Page 2 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference on his own expense. Warning: Changes or modifications not expressly approved by RuggedCom Inc. could void the user’s authority to operate the equipment.
- Page 3 Example RS900W configurations..................6 Configuration for WPA2 enabled “Access Point” operation..........6 Configure the RS900W for “Client / Bridge” operation ............ 6 Configure the RS900W for “Client / IP Bridge” operation..........7 © 2007 RuggedCom Inc. All rights reserved Rev100...
-
Page 4: Software Upgrade
Access Point and Client/Bridge functionality. 1.3.2 Step 2: File location Copy binary files <wlan1.bin> and <wlan2.bin> to the TFTP server configured directory. 1.3.3 Step 3: Verify the ROS Software version a- Login as “admin” © 2007 RuggedCom Inc. All rights reserved Rev100... - Page 5 LED on the front panel. When the LED is lit, the wireless interface is available. b- Select WLAN Interface -> Miscellaneous Parameters -> Version c- You should see something like “WLAN-FS.1.6-APP.1.6” reported to the display. © 2007 RuggedCom Inc. All rights reserved Rev100...
- Page 6 Set IP address of wireless interface: Ensure that WLAN Interface -> Addressing Parameters -> IP Address is configured. g- Set IP subnet mask of wireless interface: Ensure that WLAN Interface -> Addressing Parameters -> Subnet Mask is configured. © 2007 RuggedCom Inc. All rights reserved Rev100...
- Page 7 The only difference between the configuration of “Client / IP Bridge” and “Client / Bridge” is the selection of “Operational Mode” in Section 2.2 Step (e). Instead of setting “Client Bridge” option you will set “Client IP Bridge” option in the “Operational Mode”. © 2007 RuggedCom Inc. All rights reserved Rev100...
Need help?
Do you have a question about the RuggedWireless RS900W Family and is the answer not in the manual?
Questions and answers