Appendix; Restoring The Factory Settings; Loading The Preload Data; Initialization - Korg PS60 Owner's Manual

Restoring the factory settings

Loading the preload data

Here's how to return the performances, programs, and
global settings to their factory-set state.
You can do this in either of the following two ways.
• Load only the preload data. (Recommended)
Data other than the preload data (i.e., user
performances and programs) will remain
unchanged.
( "Data loaded by Load Preload All")
• Execute initialization.
All data other than the preload programs (i.e., the
user performances and programs) will be cleared.
( "Initialization")
Never turn off the power while data is being
loaded.
Loading the preload data will rewrite the data in
the PS60's internal memory. If you want to keep the
data that's in internal memory, use PS60 Editor/
Plug-In Editor to save the data before you proceed.
Note: Before you load, you'll need to turn the Global
"Memory Protect" setting off for the data that will be
loaded. You can't load the data if the protect setting is
On.
Proceed as follows.
1. Press the GLOBAL button.
2. Press the CURSOR/VALUE  button to move to
the top level of the edit page tree. The page where
no symbol is shown in the upper left of the
display is the top level.
3. Use the  buttons to select "Command."
4. Press the  button to select Load Preload.
5. Press the  button. A page will appear in which
you can select the data to be loaded.
6. Press the  button to get the "OK?" prompt.
7. Press the  button to execute the Load operation.
The display will indicate "Now Executing" while
the data is being written. Never turn off the power
while this indication is shown.

Appendix

Data loaded by Load Preload All
The following data will be loaded when you execute
the Load operation.
Program
• A.Piano: 01–30 (A000–A029)
• E.Piano: 01–85 (A030–A114)
• Organ: 01–67 (A115–B053)
• Strings: 01–30 (B054–C002)
• Brass: 01–30 (C003–C083)
• Synth: 01–167 (C084–D055)
Performance: Bank A-1...C-5
Global Setting
Data not loaded by Load Preload All
Program
• (D056–D127)
Performance: Bank D-1...D-5

Initialization

If the PS60 begins operating in an unstable manner,
please initialize it.
1. Power-off the PS60.
2. While holding down the four PERFORMANCE
buttons and the OCTAVE DOWN button, power-
on the PS60.
The PS60 will be initialized, and the factory-set data
will be written into internal memory. The display
will indicate "Initializing..." while data is being
written. Never turn off the power while this
indication is shown.
55