Adjusting The Sound - Kenwood VRS-5100 Instruction Manual

Normal playback

Adjusting the sound

ACTIVE EQ
MULTI CONTROL∞¥5
PHONES
POWER
MUTE
VOLUME
+ ⁄ –
SOUND
Adjusting the TONE (remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
mode, analog stereo mode.
1 Press the SOUND key to select the SOUND mode.
2 Use the MULTI CONTROL∞¥5 keys or TRIM∞/5 keys to select
"TONE" and then press the SOUND key.
DOLBY DEX NEO:6 DSP TS MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
3 When in TONE ON selection, press the SOUND key for the
following displays.
BASS : Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
4 Use the MULTI CONTROL ∞¥5keys or TRIM∞/5 keys to adjust
the sound quality.
DOLBY DEX NEO:6 DSP TS MUTE
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 20 seconds.
5 Press the SOUND key to accept the setting.
6 Use the MULTI CONTROL ∞¥5keys or TRIM∞/5 keys to select
the "EXIT".
7 Press the SOUND key to return to the input indication.
18
EN
INPUT SELECTOR
VOLUME CONTROL
ACTIVE EQ
TRIM∞¥5
DIGITAL ST.
L
AUTO
LFE
DIGITAL ST.
L
AUTO
LFE
LS S BS RS
Muting the sound (remote control only)
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
DOLBY DEX
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
To cancel
Press the MUTE key again so that the "MUTE" indicator goes off.
• MUTE ON can also be deactivated by turning the pressing
VOLUME CONTROL knob (or VOLUME +/- keys).
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1 EQ CINEMA :Effective when watching a movie.
2 EQ MUSIC
3 EQ GAME
4 EQ OFF
• ACTIVE EQ function will not be available when during recording
or DTS-ES MATRIX is ON, and during 96kHz LPCM playback.
Listening with headphones
C R
SW
S BS RS
1 Connect headphones to the PHONES jack.
• The sounds from all speakers are cut off.
C R
SW
2 Use the VOLUME CONTROL knob (or VOLUME +/- keys) to
adjust the volume.
Blinks
NEO:6 DSP TS MUTE DIGITAL
(The ACTIVE EQ. indicator lights up.)
:Effective when listening to music.
(The ACTIVE EQ. indicator lights up.)
:Effective when playing game.
(The ACTIVE EQ. indicator lights up.)
:The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ. indicator goes off.)
PHONES