Input Settings; System Settings - Kenwood DDX395 Instruction Manual

Settings Settings

Input settings

Display the <Input> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch [Input].
Setup
Rear Camera
Audio Enter
Parking Assist
Display Enter
Input
System
E.g. Input settings screen for DDX395
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
• ON: Displays the picture from the rear view camera
when you shift the gear to the reverse (R) position.
– A caution message appears on the screen. To
remove the caution message, touch the screen.
• OFF (Initial): Select this when no camera is
connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
<Guidelines Setup>
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Select the mark (1), then adjust the position of the
selected mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch and hold [Initialize ] for 2 seconds to set all
the marks to the initial default position.
<Parking Assist>
(Only for DDX395/DDX375BT)
Configure settings for using the ADS adapter.
<Parking Assist Display>
When an ADS adapter is connected, you can display
information about obstacles around the car.
• ON: Always displays information.
• Dyn. (Initial): Displays information when the sensor
detects obstacles.
• OFF: Cancels.
<Parking Assist Position>
Select where information about obstacles is displayed
on the screen.
• Left/Right (Initial)

System settings

Display the <System> screen.
On the Home screen, touch as follows:
Then, on the <Setup> screen, touch [System].
Setup
Language
Audio English
Clock
Display Enter
Smartphone Setup
Input Enter
Bluetooth Setup
System Enter
Maestro Setup
Enter
E.g. System settings screen for DDX395
<Language>
Select the text language used for on-screen
information. For details, see "Initial settings" on
page 5.
<Clock>
Set the clock. For details, see "Clock settings" on
page 6.
45
ENGLISH