When Moving The Unit - Roland SOLJET SC-500 User Manual

Maintenance

When Moving the Unit...

NOTICE
When moving the unit, first carry out head washing, then secure the carriage in place.
Head cleaning requires three SOL INK cleaning cartridges, which are optionally available. Be sure to use SOL
INK cleaning cartridges. Use of any other type may result in breakdown.
1
If there is material loaded, hold down the [SETUP]
key for 1 second or longer to cancel setup, then
remove the material (see "Remove the Material").
3
Press the [ ] key to make the following screen
appear on the display.
INK CONTROL
EMPTY MODE
5
When the display shown in the figure appears, discard
the discharged ink in the drain bottle.
* Be sure to discard the discharged ink.
Attempting to head washing while discharged ink
remains may cause discharged ink to overflow from
the bottle.
DISCARD
7
When all ink cartridges have been removed, head
washing starts. Follow the messages on the display to
carry out the procedure.
Messages appearing during head washing
SET CL-LIQUID
[KCMcmY]
Insert a cleaning cartridge into the ink
cartridge port for the flashing color.
REMOVE CL-LIQUID
[KCMcmY]
Remove the cleaning cartridge from the ink
cartridge port for the flashing color.
K = Black C = Cyan
m = Light Magenta Y = Yellow
52
DRAIN INK
M = Magenta c = Light Cyan
2
Press the [MENU] key and [
following screen appear on the display.
4
Use the [ ] key to select [HEAD WASH], then press
the [ENTER] key.
INK CONTROL
HEAD WASH
6
Mount the drain bottle and press the [ENTER] key to
display the screen shown in the figure.
REMOVE CARTRIDGE
8
When the display shown in the figure appears, head
washing is finished.
Press the [POWER] key to switch off the sub power.
The POWER LED goes out
INK CONTROL
HEAD WASH
9
When the POWER
LED goes out, turn off
the main power switch.
Continued on the next page
] key to make the
MENU
INK CONTROL
[KCMcmY]