Roland SOLJET SC-500 User Manual page 49

1
Hold down the [CLEANING] key for 1 second or
longer to start head cleaning.
3
Check the printing-test results.
If a problem is found, repeat the cleaning.
If drop-out persists even after carrying out cleaning several times
1
Press the [MENU] key and [
[HEAD CLEANING], then press the [
3
When head cleaning finishes, hold down the [TEST
PRINT] key for 1 second or longer to perform a
printing test (see "Setup for Printing -- Test Printing").
If image drop-out is not corrected even when cleaning has been performed several
times from the [POWERFUL] menu
If image drop-out is not corrected even when cleaning has been performed several times from the [POWERFUL] menu, use the included
cleaning kit. For information on how to use the cleaning kit, refer to the documentation included with the kit.
If cleaning with the cleaning kit does not correct image drop-out, consult your authorized Roland DG Corp. dealer or service center.
] key to display
] key.
MENU
HEAD CLEANING
2
When head cleaning finishes, hold down the [TEST
PRINT] key for 1 second or longer to perform a
printing test (see "Setup for Printing -- Test Printing").
2
Use the [ ] and [
[MEDIUM] or [POWERFUL], then press the
[ENTER] key.
Head cleaning starts.
HEAD CLEANING
MEDIUM
or [POWERFUL]
*The cleaning function increases in this sequence.
- When the [CLEANING] key is pressed
- The [MEDIUM] menu item on the [HEAD
CLEANING] menu
- The [POWERFUL] menu item
4
Check the printing-test results.
If a problem is found, repeat the cleaning.
Maintenance
] keys to select either
47