Roland FP-7F Implementation Manual page 28

● 015f: Stereo Delay5
This is a stereo delay.
No Parameter Value
1 Delay Left Mode 0-1
2 Delay Left 0-127
3 Delay Left 0-21
4 Delay Right Mode 0-1
5 Delay Right 0-127
6 Delay Right 0-21
7 Phase Left 0-1
8 Phase Right 0-1
9 Feedback Mode 0-1
10 Feedback #1 49-89
11 HF Damp 0-17
12 Low Gain 0-30
13 High Gain 0-30
14 Balance #2 0-100
15 Level 0-127
● 0150: Monaural Delay
A delay that provides a long delay time.
No Parameter Value
1 Delay Mode 0-1
2 Delay Time 0-127
3 Delay Time #1 0-21
4 Phase 0-1
5 Feedback 49-89
6 HF Damp 0-17
7 Pan 0-127
8 Low Gain 0-30
9 High Gain 0-30
10 Balance #2 0-100
11 Level 0-127
● 0151: Modulation Delay
Adds modulation to the delayed sound.
Description
When this is set to "note," the
ms, note effect is synchronized with the
tempo.
Adjusts the time until the delay
0-1270 ms
sound is heard. (Hz)
Adjusts the time until the delay
note
sound is heard. (note)
When this is set to "note," the
ms, note effect is synchronized with the
tempo.
Adjusts the time until the delay
0-1270 ms
sound is heard. (Hz)
Adjusts the time until the delay
note
sound is heard. (note)
Normal,
Phase of the delay sound
Inverse
Selects the way in which delay
Normal, Cross sound is fed back into the effect.
(See the figures above.)
Adjusts the amount of the delay
0 - +80% sound that's fed back into the
effect.
Adjusts the frequency above which
sound fed back to the effect is
200-8000 Hz,
filtered out. If you don't want to
Bypass
filter out any high frequencies, set
this parameter to Bypass.
-15 - +15 dB Gain of the low frequency range
-15 - +15 dB Gain of the high frequency range
D100:0W - Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
0-127 Output level
Description
When this is set to "note," the
ms, note effect is synchronized with the
tempo.
Delay time from when the original
0-2540 ms sound is heard to when the delay
sound is heard (Hz)
Delay time from when the original
note sound is heard to when the delay
sound is heard (note)
NORMAL, Phase of the delay (NORMAL: non-
INVERSE inverted, INVERSE: inverted)
Proportion of the delay sound that
0 - +80%
is to be returned to the input
Frequency at which the high-
200-8000 Hz,
frequency content of the delayed
Bypass
sound will be cut (Bypass: no cut)
L64 - 63R Panning of the delay sound
Amount of boost/cut for the high-
-15 - +15 dB
frequency range
Amount of boost/cut for the high-
-15 - +15 dB
frequency range
D100:0W - Volume balance of the original
D0:100W sound (D) and the delay sound (W)
0-127 Output volume
No Parameter Value
1 Delay Left Mode 0-1
2 Delay Left 0-127
3 Delay Left 0-21
4 Delay Right Mode 0-1
5 Delay Right 0-127
6 Delay Right 0-21
7 Feedback Mode 0-1
8 Feedback 49-89
9 HF Damp 0-17
10 Rate Mode 0-1
11 Rate 1-127
12 Rate 0-21
13 Depth #1 0-127
14 Phase 0-90
15 Low Gain 0-30
16 High Gain 0-30
17 Balance #2 0-100
18 Level 0-127
● 0152: Triple Tap Delay
Produces three delay sounds; center, left and right.
No Parameter Value
1 Delay Left Mode 0-1
2 Delay Left 0-127
3 Delay Left 0-21
4 Delay Right Mode 0-1
5 Delay Right 0-127
6 Delay Right 0-21
7 Delay Center Mode 0-1
8 Delay Center 0-127
9 Delay Center 0-21
10 Center Feedback #1 49-89
11 HF Damp 0-17
12 Left Level 0-127
13 Right Level 0-127
14 Center Level 0-127
15 Low Gain 0-30
16 High Gain 0-30
17 Balance #2 0-100
18 Level 0-127
28
Description
When this is set to "note," the
ms, note
effect is synchronized with the
tempo.
Adjusts the time until the delay
0-1270 ms
sound is heard. (Hz)
Adjusts the time until the delay
note
sound is heard. (note)
ms, note
Settings of the Delay R The
parameters are the same as for the
0-1270 ms
Delay L.
note
Selects the way in which delay
Normal, Cross sound is fed back into the effect
(See the figures above.)
Adjusts the amount of the delay
0 - +80% sound that's fed back into the
effect.
Adjusts the frequency above which
sound fed back to the effect is
200-8000 Hz,
filtered out. If you don't want to
Bypass
filter out any high frequencies, set
this parameter to Bypass.
When this is set to "note," the
Hz, note effect is synchronized with the
tempo.
0.05-10.00 Hz Frequency of modulation (Hz)
note Frequency of modulation (note)
0-127 Depth of modulation
0-180 deg Spatial spread of the sound
-15 - +15 dB Gain of the low frequency range
-15 - +15 dB Gain of the high frequency range
D100:0W - Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
0-127 Output level
Description
When this is set to "note," the
ms, note effect is synchronized with the
tempo.
Adjusts the time until the delay
0-2540 ms
sound is heard. (Hz)
Adjusts the time until the delay
note
sound is heard. (note)
ms, note
Settings of the Delay R The
parameters are the same as for the
0-2540 ms
Delay L.
note
ms, note
Settings of the Delay C The
parameters are the same as for the
0-2540 ms
Delay L.
note
Adjusts the amount of the delay
0 - +80% sound that's fed back into the
effect.
Adjusts the frequency above which
sound fed back to the effect is
200-8000 Hz,
filtered out. If you do not want to
Bypass
filter out any high frequencies, set
this parameter to Bypass.
0-127 Volume of each delay
0-127 Volume of each delay
0-127 Volume of each delay
-15 - +15 dB Gain of the low frequency range
-15 - +15 dB Gain of the high frequency range
D100:0W - Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
0-127 Output level