Roland FP-7F Implementation Manual page 25

● 0143: Space D
This is a multiple chorus that applies two-phase modulation in stereo. It gives
no impression of modulation, but produces a transparent chorus effect.
No Parameter Value
1 Pre Delay 0-125
2 Rate Mode 0-1
3 Rate #1 1-127
4 Rate 0-21
5 Depth #2 0-127
6 Phase 0-90
7 Low Gain 0-30
8 High Gain 0-30
9 Balance 0-100
10 Level 0-127
● 0144: 3D Chorus
This applies a 3D effect to the chorus sound. The chorus sound will be
positioned 90 degrees left and 90 degrees right.
No Parameter Value
1 Filter Type 0-2
2 Cutoff Freq 0-16
3 Pre Delay 0-125
4 Rate Mode 0-1
5 Rate #1 1-127
6 Rate 0-21
7 Depth #2 0-127
8 Phase 0-90
9 Output Mode 0-1
10 Low Gain 0-30
11 High Gain 0-30
12 Balance 0-100
13 Level 0-127
● 0145: 2Band Chorus
A chorus effect that lets you apply an effect independently to the low-frequency
and high-frequency ranges.
No Parameter Value
1 Split Freq 0-16
2 Low Pre Delay 0-125
3 Low Rate Mode 0-1
Description
Adjusts the delay time from the
direct
0.0-100.0 ms
sound until the chorus sound is
heard.
When this is set to "note," the
Hz, note effect is
synchronized with the tempo.
0.05-10.00 Hz Frequency of modulation (Hz)
note Frequency of modulation (note)
0-127 Depth of modulation
0-180 deg Spatial spread of the sound
-15 - +15 dB Gain of the low range
-15 - +15 dB Gain of the high range
Volume balance between the direct
D100:0W -
sound (D) and the chorus sound
D0:100W
(W)
0-127 Output Level
Description
Type of filter
Off: No filter is used
Lpf: Cuts the frequency range
Off, Lpf, Hpf
above the Cutoff Freq
Hpf: Cuts the frequency range
below the Cutoff Freq
200-8000 Hz Basic frequency of the filter
Adjusts the delay time from the
0.0-100.0 ms direct sound until the chorus
sound is heard.
When this is set to "note," the
Hz, note effect is synchronized with the
tempo.
0.05-10.00 Hz Frequency of modulation (Hz)
note Frequency of modulation (note)
Modulation depth of the chorus
0-127
effect
0-180 deg Spatial spread of the sound
Adjusts the method that will be
used to hear the sound that is
output to the OUTPUT jacks. The
Speaker,
optimal 3D effect will be achieved if
Phones
you select Speaker when using
speakers, or Phones when using
headphones.
-15 - +15 dB Gain of the low range
-15 - +15 dB Gain of the high range
Volume balance between the direct
D100:0W -
sound (D) and the chorus sound
D0:100W
(W)
0-127 Output Level
Description
Frequency at which the low and
200-8000 Hz
high ranges will be divided
Delay time from when the original
0.0-100.0 ms sound is heard to when the
low-range chorus sound is heard
When this is set to "note," the
Hz, note effect is synchronized with the
tempo.
4 Low Rate 1-127
5 Low Rate 0-21
6 Low Depth #1 0-127
7 Low Phase 0-90
8 High Pre Delay 0-125
9 High Rate Mode 0-1
10 High Rate 1-127
11 High Rate 0-21
12 High Depth #2 0-127
13 High Phase 0-90
14 Balance 0-100
15 Level 0-127
● 0122: Rotary
The Rotary effect simulates the sound of the rotary speakers often used with
the electric organs of the past. Since the movement of the high range and low
range rotors can be set independently, the unique type of modulation
characteristic of these speakers can be simulated quite closely. This effect is
most suitable for electric organ Patches.
No Parameter Value
1 Speed #1 0-1
2 Woofer Slow Speed 1-127
3 Woofer Fast Speed 1-127
4 Woofer Acceleration 0-15
5 Woofer Level 0-127
6 Tweeter Slow Speed 1-127
7 Tweeter Fast Speed 1-127
8 Tweeter Acceleration 0-15
9 Tweeter Level 0-127
10 Separation #2 0-127
11 Level 0-127
25
Rate at which the low-range chorus
0.05-10.00 Hz
sound is modulated (Hz)
Rate at which the low-range chorus
note
sound is modulated (note)
Modulation depth for the low-range
0-127
chorus sound
Spaciousness of the low-range
0-180 deg
chorus sound
Delay time from when the original
0.0-100.0 ms sound is heard to when the
high-range chorus sound is heard
When this is set to "note," the
Hz, note effect is synchronized with the
tempo.
Rate at which the low-range chorus
0.05-10.00 Hz
sound is modulated (Hz)
Rate at which the low-range chorus
note
sound is modulated (note)
Modulation depth for the
0-127
high-range chorus sound
Spaciousness of the high-range
0-180 deg
chorus sound
D100:0W - Volume balance of the original
D0:100W sound (D) and chorus sound (W)
0-127 Output volume
Description
Simultaneously switch the
rotational speed of the low
frequency rotor and high frequency
Slow, Fast
rotor. Slow: Slows down the
rotation to the Slow Rate. Fast:
Speeds up the rotation to the Fast
Rate.
Slow speed (Slow) of the low
0.05-10.00 Hz
frequency rotor
Fast speed (Fast) of the low
0.05-10.00 Hz
frequency rotor
Adjusts the time it takes the low
frequency rotor to reach the newly
selected speed when switching
0-15
from fast to slow (or slow to fast)
speed. Lower values will require
longer times.
0-127 Volume of the low frequency rotor
0.05-10.00 Hz
Settings of the high frequency
rotor
0.05-10.00 Hz
The parameters are the same as for
0-15
the low frequency rotor
0-127
0-127 Spatial dispersion of the sound
0-127 Output Level