Setting Various Function Modes - Roberts R9969 Manual

Setting various function modes

Using the Mode button and a two-digit code, which you enter using
the numerical buttons '1---0', you can change various functions:
Code Function
MODE 10 FM frequency change
* in 100 kHz steps
MODE 20 MW frequency change
* in 9 kHz steps
MODE 30 Time display in 12 hour
* format
MODE 40 Signal tone off
*
MODE 50 Arrange stations in
* sequence from low to
high frequency range
To change the various function modes.
1. Press the Mode button.
2. Enter the desired code, shown in the table using the numbered
buttons '1---0'.
3. Press the Freq./Clock button to confirm.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Code Function
11 FM frequency change in
200 kHz steps
21 MW frequency change in
10 kHz steps
31 Time display in 24 hour
format
41 Signal tone on
51 Arrange stations in
sequence from low to
high frequency range
1
2
3
23