Snooze Function - Roberts Revival UNO Manual

the alarm setting procedure. When your radio is set to wake by the radio alarm, your radio will switch to the selected radio station. If the radio cannot
Note: If the radio is switched on because of a radio alarm you can control basic functions such as the volume control.
When the alarm activates it will start softly and gradually increase in level.
1. Whilst an alarm is sounding, press On/Off to cancel the alarm.

Snooze function

1. When the radio or buzzer alarm sounds, press Tuning/Select/Snooze control.
This will silence the alarm for the selected number of minutes. The snooze
duration can be adjusted between 5 and 20 minutes in 5 minute increments.
The default setting is 5 minutes.
When Snooze has been pressed during an alarm, the display will show the
Snooze symbol . This sequence can be repeated as needed. The snooze
function can also be activated using other buttons on the radio.
2. To cancel the Snooze function, press On/Off.
The snooze duration can only be set while the radio is playing.
1. When your radio is playing, press Menu.
2. Rotate Tuning until 'SNOOZE' appears on the display.
3. Press Tuning.
4. Rotate Tuning to choose the desired snooze setting from between 5, 10, 15
and 20 minutes.
5. Press Tuning
15
1
DAB
DAB