Changing Preset Positions; Adjusting The Volume; Adjusting The Tone - Roberts R9969 Manual

Changing preset positions

1. Enter the preset station you want to change using the numerical
buttons '1...0'.
2. Press the Memo AM/PM button and the selected preset position
flashes.
3. Enter the new preset position using the numerical buttons '1...0'. A
signal sounds and the preset positions are changed.

Adjusting the volume

1. Adjust the volume using the Volume control on the right hand side
of the receiver.

Adjusting the tone

1. Adjust the tone using the Tone low/high switch on the right hand
side of the receiver.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1 2
3
1
1
15