SewNg Screen (Cycle SewNg Mode) - JUKI APW-896/IP-420 Instruction Manual

(6) Sewing screen (Cycle sewing mode)
A B
E
F
G
Symbol Name of button
INTERLINING SUPPLYING button
A
TYPE OF WELT CHANGE-OVER button
B
CLAMP UP PROHIBITION AT SEWING END
C
button
DIRECT PATTERN LIST button
D
CYCLE DATA display
E
COUNTER CHANGE-OVER button
F
COUNTER VALUE CHANGE button
G
BOBBIN THREAD (RIGHT) REMAINING
H
AMOUNT
BOBBIN THREAD (LEFT) REMAINING
I
AMOUNT
LEFT SCROLL button
J
RIGHT SCROLL button
K
MARKING LIGHT SETTING button
L
It is possible to customize display/non-display of the respective buttons.
＊
For the details, refer to
C D
I
H
J
K
L
When ths button s pressed, nterlnng s suppled.
＊ This is displayed when "With" of
wth optonal settng.
Type of welt change-over screen is displayed, and change-over of type of welt and
adjustment of parallelism of the binder can be performed.
When this button is held pressed, the clamp is returned in the lowered state at the time of
sewng end.
It is convenient to use this button at the time of adjustment of marking light and trial sewing.
Direct pattern list screen is displayed and selection of the sewing data can be performed.
All pattern data that have been registered to the cycle sewing data are displayed.
When this button is pressed, display of sewing counter and number of pcs. counter is
changed over. This button is displayed only when both sewing counter and number of pcs.
counter are ON.
Counter value whch s dsplayed at present s changed.
This button detects light from bobbin and informs that bobbing thread remaining amount is
running out. When one stitching completes, the counter value is subtracted, and the counter-
up screen s dsplayed when "0" s reached.
＊ This button is displayed only when the reflecting light from bobbin is detected.
This button detects reflecting light from bobbin and informs that bobbin thread remaining
amount s runnng out. When one sttchng completes, the counter value s subtracted, and
the counter-up screen is displayed when "0" is reached.
＊ This button is displayed only when the reflecting light from bobbin is detected.
Pattern data to be sewn next is moved forward by one. In case of the first pattern, it moves
to the last pattern.
Pattern data to be sewn next is moved backward by one. In case of the last pattern, it moves
to the first pattern.
Marking light setting screen is displayed, and changeover of marking light irradiation position
are performed.
"^-13. CUSTOMIZING THE DATA INPUT SCREEN"
Description
and setting of change of marking light set value
− 33 −
, automatc nterlnng supplyng devce s set
, and
p.80.