Replenishing Grease To The Designated Place - JUKI APW-896/IP-420 Instruction Manual

3. REPLENISHING GREASE TO THE DESIGNATED PLACE

＊ When "Grease-up warning E220" or "Grease-up error E221" is displayed, or when the machine has
been used for one year, be sure to perform replenishing of grease.
When turning ON the power after the sewing machine has operated up to 40 million stitches, "grease-up
warning E220" informing of the time of grease replenishment is displayed on the panel. When pressing
RESET button to leave the error screen, the machine can continue operating. However, the error
has not been released and the error is displayed every time the power is turned ON. After performing
replenishment of grease which is explained later, call "Memory switch U245" and set the number of
stitches of operation to "0" with CLEAR button
When the machine has been continuously used up to 48 million stitches, "grease-up error E221" is
displayed on the panel. In this case, even when RESET button
released, the sewing after that cannot be performed. Be sure to call "Memory switch U245" and set the
number of stitches of to "0" with CLEAR button
explained later.
1. "Grease-up warning E220" and "Grease-up error E221" are displayed again unless memory
switch U245 is cleared to "0" after replenishing grease.
2. Be sure to use the grease tube (Part No. : 40006323) supplied with the machine as accessories
for replenishing grease to the designated place which is explained later. If any grease other than
the designated one is replenished, Component breakage will be caused.
3. Keep the used grease tube in a safe place.
CAUTION
:
To prevent accidents caused by abrupt start of the sewing machine, start the work after turning OFF
the power.
.
is pressed and the error screen is
after performing replenishment of grease which is
− 101 −