NamNg The Pattern - JUKI APW-896/IP-420 Instruction Manual

(5) Naming the pattern
1 Display the input screen
When the input screen of independent sewing mode, alternate sewing mode and cycle sewing mode is
dsplayed, t s possble to nput the name to the pattern data.
2 Call the character input screen
Press CHARACTER INPUT button
A
B
C D
3 Input the character
It is possible to input the character by pressing CHARACTER button B you desire to input. As many as
14 characters of characters (
) can be inputted. Cursor can be moved with CURSOR LEFT MOVE button
RIGHT MOVE button
position of the character you desire to erase and press ERASE button
4 End the character input
Press ENTER button
displayed at the upper part of the input screen.
A and the character nput screen (screen B) s dsplayed.
A
Data input screen (screen A)
F
B
E
C D
Character input screen (screen B)
to and to
D . When you desire to erase the inputted character adjust the cursor to the
F to end the character input. After the end, the inputted character is
− 47 −
F
B
E
) and symbols ( ,
E .
A
F
E
C D
, , , and
C and CURSOR