Corner Knife Actuating Position Setting Procedure - JUKI APW-896/IP-420 Instruction Manual

(4) Corner knife actuating position setting procedure

By pressing corner knife actuating position setting button ( A or B ), it is possible to set the corner knife
actuatng poston.
Independent sewing mode
/ cycle sewing mode
D
E
Corner knife actuating position at the
start of sewing setting screen
(Screen A)
I
H
Corner knife actuating position at the
end of sewing setting screen (Screen B)
A
B
Alternate sewing mode
1 Setting of corner knife actuating position at the start of
sewing
For the setting of corner knife actuating position at the start of
sewing, there are 4 kinds of right width C , left width D , left side
front and rear E and right side front and rear F , and t s possble
C
to separately set.
It is possible to set by pressing + button and "-" button
respectvely.
F
See
data list" p.51.
2 Setting of corner knife actuating position at the end of
sewing
For the setting of corner knife actuating position at the end of
sewing, there are 4 kinds of right width G , left width H , left side
front and rear I and right side front and rear J , and t s possble
to separately set.
J
It is possible to set by pressing + button and "-" button
respectvely.
G
See
data list" p.51.
− 113 −
A
B
A
B
, , and
, , and
of "^-8. (2) Sewing
of "^-8. (2) Sewing