About The Imcv-Giga-Medialinx; Led Operation - IMC Networks iMcV-Giga-MediaLinX Operation Manual

Switching media converter
Table of Contents

Advertisement

About the iMcV-Giga-MediaLinX

The iMcV-Giga-MediaLinX is an SNMP-manageable, IEEE 802.3 10/100/1000
switching media converter that converts both speed and media.
Each iMcV-Giga-MediaLinX module provides a single conversion between one of the
following:
10Base-T twisted pair and 1000Base-SX/LX multi-mode or single-mode fiber
100Base-TX twisted pair and 1000Base-SX/LX multi-mode or single-mode fiber
1000Base-T twisted pair and 1000Base-SX/LX multi-mode or single-mode fiber

LED Operation

Each iMcV-Giga-MediaLinX module features diagnostic LEDs that provide information
on features and ports.
PWR
Glows green when powered
1000
Glows green at 1000 Mbps
100
Glows green at 100 Mbps
Glows amber at 10 Mbps
10
Glows green when a link is established
LNK/ACT
Blinks green when data activity occurs (this is true for
both LNK/ACT LEDs)
FDX
Glows amber in Full-Duplex mode
Off in Half-Duplex mode, blinks if collisions occur
Glows green when FX LinkLoss is enabled
FXLL
Blinks when FX LNK is lost
TXLL
Glows green when TX LinkLoss is enabled
Blinks when TX LNK is lost
LNK/ACT
Glows green when a link is established
Blinks green when data activity occurs
FA
Glows green when FiberAlert is enabled
iMcV-Giga-MediaLinX w/LFPT

Advertisement

Table of Contents
loading

Table of Contents