Installing Additional Microsoft® Windows Server™ 2003 R2 Software; Installing Lights-Out Management Features - HP ML310 - ProLiant - G2 User Manual

Click Add/Remove Windows Components to launch the Microsoft® Windows® Components
3.
wizard.
Select Application Server, and then click Details.
4.
Select Internet Information Services.
5.
Click OK.
6.
Click Next to begin the Microsoft® Internet Information Services installation.
7.
Click Finish to complete the installation, and then close the Add or Remove Programs window.
8.
Installing additional Microsoft® Windows Server™
2003 R2 software
After you have completed the operating system installation and initially logged in to the server,
1.
reboot and log in to the server again.
From the desktop, double-click Windows Server 2003 R2.
2.
At the welcome screen, click Continue Windows Server 2003 R2 Standard Edition Setup.
3.
Click Next.
4.
Read the license agreement. If you agree to the terms of the license agreement, select I accept the
5.
terms in the license agreement, and click Next to continue.
Click Next.
6.
Click Finish.
7.
At the welcome screen, click Exit to close the utility.
8.

Installing Lights-Out management features

If you purchased a RILOE board for the server or purchased a server with an iLO controller installed, use
the following procedure to complete the installation. Do not attempt to install the device driver until after
the operating system installation is complete.
IMPORTANT:
Controller and the iLO controller as a Base System Device. The Hardware Wizard continues to
appear until the driver installation has been completed.
At the Found New Hardware Wizard window, click Next.
1.
Select Search for a Suitable Driver for My Device.
2.
Click Next.
3.
Select Specify a Location, and clear the Floppy Drive and CD-ROM options.
4.
Click Next.
5.
Enter the following path in the textbox:
6.
C:\HPDRVRS
Click OK.
7.
Click Next at the Driver Files Search Results screen, and then click Finish.
8.
The Microsoft® Hardware Wizard detects the RILOE board as a PCI Memory
Post-installation tasks 16