Message Format - HP Data Protector A.06.11 Integration Manual

DP_Backup
DP_Restore
DP_Mount
DP_Misc
DP_SPI
DP_Interactive

Message format

An Operations Manager message includes the following parameters:
Message Group
Applications
Node
Severity
Service Name
Object
Backup session messages
Restore session messages
Mount request messages
All other important Data Protector related messages
Messages from the Data Protector Integration
Detailed messages normally only displayed in the
Data Protector GUI. This message group is disabled
as default. Enable the group for the greatest level
of detail about Data Protector operation.
The following groups are available, as described above: DP_Backup,
DP_Restore, DP_Mount, DP_Misc, DP_SPI, DP_Interactive
Set to Data Protector.
Set to the hostname of the Data Protector system on which the event
occurred.
Reflection of the impact that the event has on Data Protector. For SNMP
trap derived messages, the severity value of the SNMP trap is used as
the severity level of the message.
Depends on the impact the event has on a service. The value must map
with a node in Data Protector's service tree.
Allows the source of the event to be classified with fine granularity.
• Data Protector SNMP traps set the parameter to NOTIFICATION.
• Messages originating from a monitored log file set this parameter
to the name of the log file.
• Messages originating from a monitor set it to the name of the
monitor.
Integration guide for HP Operations Manager for Windows 49