ProSpot Fitness P-500 Owner's Manual page 6

23.
24.
Insert the Select Pin (65) into the desired hole in the Center Guide Rod (70) as shown. Carefully to lock the pin in
place.
Place the Guide Rod Top Plate (73) on top of the two Guide Rods (77) and slide the two Guide Rod Cups (74)
onto the Guide Rods (77) with downward pressure. lnsert two Allen bolts (71) into the threaded holes in the Guide
Rod Cup Pockets of the Guide Rod Top Plate (73). Tighten securely.
Attach the Pec Deck Support Frame (62) and the Pec Deck Backing Frame (64) to the Pec Deck Support Post
(16) using one longer bolt (57), one shorter bolt (58), four washers (18) and two nuts (20) as shown. Be sure this
assembly is centered and level and then tighten the bolts securely.
STEP # 1: MAIN FRAME ASSEMBLY
a 3 -
69
e0
1 8