Table of Contents
Advertisement
APPENDIX 2:
MenuKey™ DOWNLOAD PROCEDURE
The MenuKey™ System automatically changes all the
cooking programs on the numbered icon pads with the
turn of a key.
To change the menus on the oven:
Ensure the power switch is off.
1
2
Lift the MenuKey™ cover in the top panel of
the oven and put the key in the keyhole
Turn the key clockwise to the stop
( ¼ turn ).
Do not remove the key at this stage.
3
Switch the power switch on.
The oven will now go through the program
download sequence by displaying the
following:
The Key Code
The number of
programs and each
program number on
the key.
When the display shows 0:00, the cavity
lights up and the fans start.
Remove the key and close the cover and the
oven is ready to use with the new programs.
To confirm the download is successful
Switch off the oven.
Switch on and the display briefly will show the following:
1. The new key code
2. 0:00 (oven ready to use)
example: Key 01
example: 38 programs
Mealstream Ovens Pt. No. 32Z3403 Issue 16
Page 47
EPS-FAIL-REDO
If the key is removed before the
download is complete or the
process is interupted the display
shows EPS then FAIL then
REDO
Switch oven off and begin the
MenuKey download again.
Advertisement
Table of Contents
