Fujitsu SPARC Enterprise M8000 Service Manual page 136

3. Bind the cables connected to each external I/O expansion unit with a short
hook-and-loop fastener. (See (1) in
Caution – Keep optical fiber cables as far apart from other cables as possible to prevent the
optical fiber cables from being covered by the other cables.
4. Bind the bundles of cables with a long hook-and-loop fastener at location (2) shown
in
5. Fasten the bundles of cables with a long hook-and-loop fastener to the cable holder
at location (3) shown in
switch of the ACS.
4-42 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
while taking care not to touch the main line switch of the ACS.
FIGURE 4-12
FIGURE 4-12
)
FIGURE 4-12
while taking care not to touch the main line