Fluke 2680A Service Manual page 169

Diagnostic Testing and Troubleshooting
6
Using the RS-232 Interface
Restrictions: None.
Notes: None.
Command: TOT?
Description: Get the value of the DIO Totalizer
Parameters: None
32
Response: 0 to 2^ (4,294,967,296)
Restrictions: None.
Notes: None.
Command: TOTCFG <direction>, <debounce>
Description: Set the value of the DIO Totalizer configuration
Parameters: <direction> = 0 for down, 1 for up; <debounce> = 0 for off, 1 for on
Response: None
Restrictions: None.
Notes: None.
Command: TOTCFG?
Description: Get the value of the DIO Totalizer configuration
Parameters: None
Response: : <direction> = 0 for down, 1 for up; <debounce> = 0 for off, 1 for on
Restrictions: None.
Notes: For direction = 0 (decrement) and count = 0, with totalizer line pulsed, the TOT? count will wrap
32
(2^ )
Command: RATE <module>, <rate>
Description: Set the scan speed
Parameters: <module> integer from 1 to 6, <rate> = FAST, MEDIUM, SLOW
Response: None
Restrictions: None.
Notes: None.
6-23