Motion - EverFocus PARAGON Series Instruction Manual

Apply To: This button can be used to copy the video settings to other cameras. Select which cameras you
wish to copy to. "Select All" selects all cameras, "Unselect All" deselects all cameras. Click "OK" to copy the
settings or "Cancel" to exit without copying.

5.3.3 Motion

Camera: Select the camera you wish to adjust. "Title" will change to the title name of the selected camera.
Enable: Check box to enable motion detection. Other motion options will not be available unless this box is
selected.
Log: Check box to record motion events in the log.
Main Monitor: Monitor display options when a motion event occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the active camera will display on the main monitor.
Call Monitor: Monitor display options when a motion event occurs.
Figure 5-4 Camera Menu – Motion
46