Network Setting; Lan - EverFocus PARAGON Series Instruction Manual

5.7 NETWORK SETTING

is a screen shot of the NETWORK SETTING MENU. This menu is for configuring the DVR for a
Figure 5-24
network connection.
NOTE: Since every Network Configuration is different, please check with your Network Administrator or ISP
to see if your DVR requires specific IP addresses and/or port numbers.

5.7.1 LAN

Network Type:
Static IP: User can set a fixed IP for network connection.
DHCP: DHCP server in LAN will automatically assign IP for network connection
PPPoE: For direct DSL connection ONLY. Check with your ISP if they use PPPoE.
IP: This field shows the DVR's current IP Address. A static IP address must be set manually. If DHCP or
PPPoE is selected, this value will be assigned automatically.
Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the DVR will be recognized within the network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
DNS Server 1: This field shows the primary DNS server for your network. If DHCP is selected and an
internet connection is available, this value will be assigned automatically. This field must have a valid DNS
address in order to use the DDNS feature (see 5.7.3 for more detail).
DNS Server 2: This field shows the secondary DNS server for your network.
HTTP Port: Port number for HTTP/WEB communication.
Figure 5-24 Network Menu – LAN
70