Channel Switching; Display - EverFocus PARAGON Series Instruction Manual

4.7 CHANNEL SWITCHING

Use this function to change channel position
1. Select one camera
2. Press Channel button
3. Click on the channel number you wish to switch on channel bar. The display of channel will be switched.
EX: Select camera1 and enter Channel menu and choose "2", than camera1 will show on position of
camera2, camera2 will show on position of camera1

4.8 DISPLAY

1. Press Display button
2. Press once to show camera information. The following table describes each icon.
Recording
Alarm
3. Press again to show status information. The following table describes each icon.
Alarm
HD temp. too high
Record in HD2
4. Press again to show both status information and camera information.
5. Press again to hide all information.
.
on menu by using mouse or press "Display" button on the front panel.
Playback Fast forward
Motion Video loss
Audio 1~16
Control call monitor
Monitor 1 status Motion
Seq. Video loss
Fast backward
Express copy
Event
New firmware
33
Back pause
Audio out
Fan failure HD failure
No network Record in HD1