EverFocus PARAGON Series Instruction Manual page 74

Schedule Setting using Front Panel
1. Enter schedule setting mode: press Enter button to enter schedule setting mode. At this time, the
whole editing area at right-down side will be highlighted with a light blue frame. See below image.
2. Enter camera selection mode: turn Jog wheel to switch to Camera selection mode. When Camera
selection mode is selected, all 16 cameras will be highlighted in a light blue frame. See below image.
3. Selecting camera: Turn Shuttle knob to select which camera to configure. Selected camera number
will be highlighted by a dark blue frame. See above image.
4. Enter time bar editing mode: turn Jog wheel to switch to time bar editing mode. When this mode is
selected, all 9 time bars will be highlighted within a light blue frame. See below image.
5. Select desired time bar for setting: press Enter button, the first time bar will be highlighted in a red
frame. See above image. Turn Jog to select the desired time bar.
67