EverFocus PARAGON Series Instruction Manual page 65

HD Failure:
Figure 5-14 Alarm & Event Menu – Event - HD Failure
Log: Check box to record events in the log.
Buzzer: Check box to enable buzzer when hard drive fails.
Email Notify: Check box to enable email notification function when HD fails.
Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and
setting up Alarm Server in Network Setup menu)
Alarm Output: This will transmit a signal through one of the alarm outputs. It can be set to either "NONE"
(not active), "1", "2", "3", or "4".
Output Type: Output action is locked to Transparent
58