Adjusting The Welder Pro 635 - Weider PRO 635 User Manual

ADJUSTING THE WELDER PRO 635
The weight bench is designed to be used with your own weight set (not Included). The steps below explain how
the weight bench can be adjusted. See EXERCISE GUIDELINES on page 14 for important exercise information
and refer to the accompanying exercise poster to see the correct form for each exercise. Refer also to the exer-
cise information accompanying your weight set for additional exemises.
Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The
weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
A'I-rACHING WEIGHTS TO THE WEIGHT CARRIAGE
To use the lat tower, first.slide a Weight Stop (19) onto
each side of the weight tube of the Weight Carriage (56).
Slide the desired amount of weight (not included) onto the
weight tube. Be sure that an equal amoimt of weight is on
each side of the weight tube. Secure the weights on each
side of the weight tube with a Spring clrp (34).
Do not place more than 150 pounds on the Weight
Carriage. (Due to the fact that ab crunches are an aer-
obic exercise, we recommend that you do not place
more than 50 pounds on the Weight Carriage while
performing ab crunch exercises.)
ATTACHING wEIGHTS TO THE LEG LEVER
To use the Leg Lever (28), slide the desired amount of
weight (not included) onto the weight tube.
if you are using olympic weights, slide the Olympic
Adapter (58) onto the Leg Lever (28) before sliding any
weight onto the Leg Lever.
Do not place more than 150 pounds on the Leg Lever.
ADJUSTING THE BACKREST
The Backrest (36) can be set at three different positions:
the level position, the decline position, and the incline posi-
tion.
To change the position of the Backrest (36), remove the
"L"-Pin (50) from the Adjustment Bracket (51) and the
Bench Frame (39). Set the Backrest to the desired posi-
tion, align the holes in the Adjustment Bracket and the
Bench Frame, and re-insert the =L'-Pin.
• 28
Weight
Weight 58 "'_'"
Tube
36
.%
5O
51
12