Advertisement
AiR FILTER
CAUTION" Never operate saw
m without
the air fiker.
Dust and dirt wiI be drawn into engine and
damage
it. Keep the air fluter dean.
1.
Remove
the top cover (A) by loosening
the cover
retaining
screws.
Cover wiii lift off (Fig. 25).
2.
Lift the air filter (B) out of air-box
(C) (Fig. 26).
3.
Clean air filter. Wash filter in clean,
warm, soapy
water.
Rinse in clear, cool water.
Air dry completely.
NOTE:
Jt is advisable
to have a supply
of spare filters.
4.
Install air filter, install
engine / air filter cover.
Make
sure cover fits properly.
Tighten
the cover
retaining
screws
securely.
To avoid serious
personal injury,
always turn your unit off and allow it to cool
before you clean or service it.
FUEL FILTER
CAUTION"
Never operate saw
without the fuel fiker.
The fuel fiRer should be replaced after each 20
hours of use. Drain fuel tank before changing.
1.
Remove the fuel tank cap.
2.
Bend a piece of soft wire.
3.
Reach into fuel tank opening and hook fuel line.
Carefully pull the fuel line toward the opening until
you can reach it with your fingers.
NOTE: Do not puii hose completely out of tank.
4.
Lift filter (A) out of tank (Fig. 27).
5.
Pull filter off with a twisting motion. Discard filter.
6.
Install new filter. Insert end of filter into tank opening.
Make sure filter sits in bottom corner of tank. Use a
long handle screwdriver to aid in filter placement if
necessary.
7.
Fiii tank with fresh fuel / oil mixture. See Oi/and Fuel
Information page 9. install fuel cap.
A
Fig, 25
Fig, 27
¢
Fig, 26
16
Advertisement
