Image Change; Free Message - Pioneer DRM-7000 Operating Instructions Manual

When the Auto Probing function is set to OFF, the following message appears:
A u t o p r o b i n g
i s p r o h i b i t e d
To temporarily turn Auto Probe OFF, turn the key switch to the unlocked
position and press the Escape button.
Note: It takes approximately two minutes to probe a 50-disc magazine.

5.2.3.2 Image Change

5.2.3.3 Free Message

Setting the Free Message mode ON allows messages from the host computer
to over-write messages shown in the LCD window.
display other information such as the name of the Changer Controller program
and warning messages regarding discs being rewritten.
For example, when the host computer issues commands to add or remove
discs, prompting directions appear on the LCD display. If using the mail slot to
insert or remove a disc (with the Auto Eject submode turned OFF), the
following message appears:
P r e s s E N T - k e y
t o o p e n m a i l s l o t
While this information from the host computer displays in the LCD display, no
other messages can appear unless the Free Message mode is ON.
To turn OFF the Free Message function, follow the steps below.
F r e e m e s s a g e ?
Press the Enter button
F r e e m e s s a g e i s
set to ON / OFF
Press the left arrow button
F r e e m e s s a g e i s
set to ON / OFF
Press the Enter button
F r e e m e s s a g e
i s a c t i v a t e d
DRM-7000
- 26 -
Operating Instructions
It is also possible to