Toshiba 55SL417U Owner's Manual page 52

Setting Type
You can adjust the white balance setting.
1 _
> Settings > PICTURE > Expert Picture
Settings > (t_").
2
Press
• O1" • to
select White Balance. Press _._.
3 Press • or • to select 2P White Balance. Press _).
4
Press • or • to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, o1"Blue-
Gain. Press < or • to adjust. Press :_.
Copy to All Inputs
This feature copies White Balance on the current input
to all other inputs. Individual settings that are not
allowed for a specific input will not be copied.
1 _¢
> Settings > PICTURE > Expert Picture
Settings > _.
2
Press • or • to select White Balance. Press _.
3 Press • or • to select Copy to All Inputs. Press _'_.).
A confirmation screen appears.
4 Select Yes. Press @.
Resettingto the factory default
1 _*oJ
> Settings > PICTURE > Expert Picture
Settings > _.
2
Press • or • to select Reset. Press _.
A confirmation screen appears.
3 SelectYes. Press _.
Locking the picture settings
The TheaterLock 'Mfeature lets you lock items in the
PICTURE menu that affect the picture's display. These
items cannot be modified when Theaterkock is set to
On.
1 ._.o_
> Settings > PICTURE > TheaterLock
2
Press < or • to select On. Press _.
Adjusting the audio
Mutingthe sound
Press _ to partially reduce (1/2 Mute) or turn off
(Mute) the sound. Each time you press _, the mute
mode changes in the following order:
[--+1/2 Mute ----+Mute ----+Volume----+---]
If the closed caption mode is set to Off when you select
MUTE mode, the closed caption feature becomes active
if the TV program is closed-captioned. To mute the
audio without activating the closed captioning, press
to set the volume to 0.
Note: If you modify items in the SOUND menu while Mute
is active, Mute is cancelled.
Selectingstereo/SAPbroadcasts
The MTS (multi-channel TV sound) feature is only
available for analog signals on the ANT/CABLE input.
When the TV receives a stereo or SAP (second audio
program) broadcast, the icon STEREO or SAP appears
onscreen when y678 is pressed.
To listen in stereo sound:
1 _oJ
> Settings > SOUND > MTS.
2
Press < or • to select Stereo. Press _g,_.
Note:
• You can typically leave the TV in Stereo mode because
it outputs the type of sound being broadcast (stereo or
monaural).
• If the sound is noisy, selectMono.
To listen to a second audio program on an analog
station (if available):
If provided by individual analog stations, you can listen
to a second audio program containing another
language, music, or other audio information.
For example, you will hear the other language instead
of the program's normal audio.
1 ._
> Settings > SOUND > MTS.
2
Press < or • to select SAP. Press
_ _.
Note: If there is no sound in SAP mode, select Stereo.
52