Toshiba 55SL417U Owner's Manual page 137

DisplayingTV status information
To display TV status information:
Press N767.
The following information will be displayed
(if applicable):
• Current input (ANT/CABLE, Video, etc.)
• Either "CABLE"
(for
cable TV) or "ANT"
(for
overthe-
air broadcasts), if ANT/CABLE is the current input.
• Channel number (if in ANT/CABLE mode)
• Input label (if set)
• Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signals only)
• Stereo, Mono, or SAP audio status (when in HDMI
input mode, PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status (if available)
• GameTimer (if set)
• Channel Label (if set or received)
To close the screen:
Press _ again.
The following additional information (only available
for ANT/CABLE input) will display for off-air digital
channels (if applicable):
• Title
• Duration
• Detailed description
To display the next program's information for digital
channels, press _ again. Pressing _ a third time will
remoxTe the entire banner.
Viewingsupportinformation
1 _,,_
> Settings > SETUP > System Information.
2
Press _@to display support information containing
Web/Customer service numbers for US, Canada,
and Mexico.
Resetting to Factory Defaults
You can reset all settings and channels.
1 _.o*
> Settings > SETUP > Reset W > @.
2
Enter your PIN code (if a PIN code has been set).
3 A confirmation screen appears. Select Yes, and
press _. The TV will turn off automatically.
To cancel the reset:
Press _ or • to select No. Press @.
Powerfailure
If power is lost while you are watching the TV, the
Last Mode Memory feature automatically turns on the
TV when power is restored.
44