Toshiba 55SL417U Owner's Manual page 17

Connectinga VCR or DVDplayer with ColorStream ® (componentvideo)
[ Yello_w
White Red Green Blue
VCR DVD player
TV backpanel
Standard
A/V cable
AV
adapter
Standard cable
_ f Component adapter
_ cable (supplied)
Light green I
zo ,_-_q;- _ _-_- I
Light yellow i|i _ =1
Ilow
_ AV adapter cable
(supplied)
You will need:
• Standard A/V cable
• AV adapter cable (supplied)
• Standard audio cable
• Component adapter cable (supplied)
• Component video cable
- You can connect the component video cables from
the DVD player to the ColorStream NDt terminal on
the TV. Separate audio cables are required. You can
use the ColorStream NDt terminal to display
Progressive (48019, 72019, 1080p) and Interlaced
(480L 1080i) video. Check the owner's manual of the
DVD player in order to determine the best output
signal available (108019 24 Hz/30 Hz/50 Hz/25 Hz are
not supported).
- If your DVD player does not have component video,
connect a composite video cable to VIDEO 2 on the
side panel If your DVD player has HDMI video, see
p. 16.
To view the DVD player:
Turn on the DVD player. Press _ and • or • to select
OolorStream HD1. Audio configuration is required.
See "Side Shared Audio" (_ p. 30), and select
ColorStream HD1.
To view the VCR or view and record antenna-sourced:
Turn on the VCR. Tune the VCR to the channel you
want to watch. Press _ and • or • to select Video 2.
Note: For programming the TV remote control to operate
other devices, see p. 79.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs, and
other materials are prohibited under the Copyright
Laws of the United States and other countries, and
may subject you to civil and criminal liability.
17