Toshiba 55SL417U Owner's Manual page 226

ControllingHDMI®CECplayback
devices
With your TV's remote control, you can control the
connected HDMI ®CEC playback device (DVD player,
etc.) you are watching.
Available remote control key functions:
Before using these key functions, set the MODE
SELECT switch on the remote control to TV.
F_] Begins playback.
Stops playback.
Pauses the picture during play or record
mode.
Skips forward.
[_ Skips backward.
Fast-forwards.
[_ Rewinds / reverses.
• • • • Navigates contents menu, etc.
C@ Enters contents menu, etc.
;_34_ Closes the menu.
RED,
GREEN, Controls various operations
YELLOW,
BLUE
Note: These functions depend on the connected devices.
HDMI ®CEC Player Control menu functions:
1
Press _ to open the Quick menu.
2
Select HDMI-CEC Player Control. Press _.
3 Press • or • to select the item you want to control
and press :o_.
Power Turns the selected device on and off.
Root Menu Accesses the selected device's top menu.
Contents Accesses tile contents list when you press
Menu _.
Setup Menu Accesses the device's setup menu.
Note:
• These functions depend on the connected devices.
• The HDMI-CEC Player Control item is not available under
these conditions:
- A non-HDMI input is selected.
- The Enable HDMI-CEC Control item is set to Off.
- The connectedHDMI m CEC device is nota playback or
recording device.
HDMI ® CECControlinputsource
selection
If an HDMI ®CEC device with HDMI switching
capability (e.g. an amplifier) is connected to the HDMI
input, you can select another HDMI ®CEC device that is
connected to the master HDMI device.
Use _ on the remote control or the control panel
(_ p. 34).
4O