Toshiba 55SL417U Owner's Manual page 113

Connecting a PC
You can view your PC's display on the TV and hear the
sound from the TV's speakers.
Connectingto the TV's PC IN terminal
You will need:
• Analog RGB (15-pin) computer cable
• Analog audio cable
IV backpanel
I I
PC
og
cable I
o
Conversion adapter
(if necessary)
Analog
RGB
computer
cable
Before using the PC:
See "Using your PC with the TV" (_' p. 42).
To use a PC:
• Set the monitor output resolution on the PC before
connecting it to the TV.
• Supported signal formats: VGA, SVGA, XGA, WXGA,
and SXGA. For signal specifications, see p. 75.
Note:
° The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. For
configuration, see "Setting the PC audio" (_,T p. 42).
° Some PC models cannot be connected to this TV.
° If the PC has a compatible mini D-sub 15-pin terminal an
adapter is not required.
• Depending on the content's title and the PC's
specifications, some scenes may be skipped or you may
not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15-pin connector
1 R 6 Ground 11 NC
2 G 7 Ground 12 NC
3 B 8 Ground 13 H-sync
4 NC * 9 NC 14 V-sync
5 NC 10 Ground 15 NC
• NC=Not connected
Connectionto the TV's HDMI terminal
You will need:
If your PC has DVI terminal:
• HDMI-to-DVI adapter cable
• Analog audio cable
If your PC has an HDMI terminal:
• HDMI cable
PC
Analog
audio
cable
PC audio
output
qDMI-to-
DVl
adapter
cable
Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz). For signal
specifications, see p. 76.
Note:
• The edges of the picture may be hidden.
° The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. For
configuration, see "Setting the PC audio" (_ p. 42).
20