Toshiba 55SL417U Owner's Manual page 111

Connecting a digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs a
Dolby ® Digital or 2-channel down-mixed PCM (pulse-
code modulation) signal for use with an external Dolby
Digital decoder or other external audio systems with
optical audio input.
You will need:
° Optical audio cable (Use an optical audio cable that
has the larger TosLink connector, not the smaller
mini-optical connector.)
Dolby Digitaldecoder o r other
digitalaudio system
TV backpanel
Optical
audio
cable
Before controlling the audio:
• See "Selecting the optical audio output fol_nat"
(_' p. 53).
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may not
work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTYt
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources due to copy restrictions.
• The Dolby Digital format is available in the following
situations:
- When tuned to a digital RF channel
- When an HDMI input is used.
- When DLNA Certified products or widgets are used.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
18