Setting Up The Network; Wirelesssetup - Toshiba 55SL417U Owner's Manual

Setting up the Network
You can select the Network Type.
2
3
4
_uj > Settings > PREFERENCES > Network
Setup > @.
(Another: _./> Network > Network Setup > _.)
Press • o1"• to highlight Network Type.
Press < o1"• to select Wired o1"Wireless.
If you select Wired, see "Advanced
Network Setup"
(_ p. 58).
If you select Wireless, see the next section.
WirelessSetup
Note:
• ContinuedAP (Access Point) connection is not
guaranteed. Connection may be lost while watching TV.
There are 3 methods for wireless setup:
• Easy Setup (WPS)
If the AP supports WPS, this can be used.
- WPS is a standard designed to simplify the
connection of wireless LAN equipment and the setup
of network security features.
• Assisted Setup (setup using the AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You need
to manually set the Security Key.
• Manual Setup (to input all settings)
Easy Setupusing PBC(Push ButtonConfiguration)
1 _.0J
> Settings > PREFERENCES > Network
Setup > _.
2 Press • o1"• to select Wireless Setup. Press @.
3 Press • or • to select Easy Setup. Press @.
4 Press < or • to select PBC
5 Press • to select Start Scan. Press @.
6 Following the onscreen instructions, push the
appropriate button on your AP.
7 When a screen reporting that the setup has
succeeded appears, press @).
To cancel searching for the AP:
Press ___.j while searching for the AP. A message will
appear. Press < or • to select Yes. Press ._o_.
EasySetup using a PIN (PersonalIdentification
Number)
1 _._
> Settings > PREFERENCES > Network
Setup > _.
2
Press • or • to select Wireless Setup. Press @.
3 Press • or • to select Easy Setup. Press _.
4
Press < or • to select PIN.
5 Press • to select Start Scan. Press @.
6 Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7 Press • or • to select the desired AP. Press @.
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
8
When a screen reporting that the setup has
succeeded appears, press @.
To cancel searching for the AP:
Press _.j while searching for the AP. A message will
appear. Press < or • to select Yes. Press @.
AssistedSetup
1 _."_
> Settings > PREFERENCES > Network
Setup > @.
2
Press • or • to select Wireless Setup. Press (@.
3 Press • or • to select Assisted Setup. Press _).
4 Press • or • to select the desired AP. Press (@.
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
5 Select Security Key. Press @. The Software
Keyboard appears.
6 Input the Security Key using the Software Keyboard
(_#r' p. 59). To save your settings, press the BlUE
button.
Note: The Security Key must adhere to these
conditions:
-TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7
Select Done. Press @.
Note: Settings are not saved if _ is pressed before
Done is selected.
56