Toshiba 55SL417U Owner's Manual page 118

6
7
Start Scan
Press @,
Note: If you want to stop scanning, press L¢_ while
scanning.
° After scanning is complete, a channel list screen
(such as the one below) will appear. Press @ or
zg_.
Note: Encrypted channels cannot be registered
though these are displayed in the above list.
If some channels are not found after scanning:
• Check the antenna/cable connections, and scan
again.
° Connect the TV to the antenna or cable box
directly and scan again.
1
2
@ao/> Settings > SETUP > Quick Setup > @.
A confirmation message appears. Press ,i or •
to select Yes. Press @.
Repeat set up to Step 6.
• If you selected Antenna previously, select
Cable.
• If you selected
Cable previously,
select
Antenna.
4
Scan again.
Support Information
The Support Information screen appears. Press @.
Note: Refer to this information if there is any problem
and you need to contact Customer SupporL This can
be confirmed from the following operation at any time.
_ > Settings > SETUP > System Information >
Navigating the menu system
°To open the main menu, press _ui on the remote
control or TV control panel.
° Press A, V, "I, or • on the remote control or TV control
panel to navigate and make selections.
° To select a menu option, press @.
° To move to the next menu layer, press @ or A
°To return to the previous menu layer, press _,, or V.
° To close a menu instantly, press _2 or g_.
° All menus will close automatically if you do not make
a selection within 60 seconds.
25